Pip Eastop, Horn player, Photographer, Trumpet player

Horn player, Photographer, Trumpet player

Pip Eastop Hornplayer Photographer Trumpetplayer

The PipStick

The PipstickAs can be seen from the photo the PipStick is a attachment which fits securely on the underside of the horn and provides a support so that the entire weight of the instrument is taken by the right leg.The foot of the PipStick, where all the weight of the instrument is transmitted to the player’s leg, stands on the upper side of the right thigh about halfway between knee and hip. The height of it is adjustable and, to a certain extent, so is the angle at which it projects from the horn.

The Pipstick in use

Tom Allard, student at RCM, modelling a Pipstick

The development of this device began in 1981 when I began my training in the Alexander Technique. I soon realised that to enable me to take full advantage of the intensive 3 year course I had undertaken I would have to make some changes to the way I held my instrument. It seemed that to reap the full benefits of the Alexander Technique I would need to find a way of playing the horn such that my back could support itself and my shoulders and head freely, without the additional tensions demanded by a heavy static load held up by the arms for long periods.

Experiments with a variety of support mechanisms, sometimes with the help of various Alexander teachers monitoring any postural effects on me, confirmed that I would find great long-term benefit in having the horn suspended, rendered effectively weightless in the playing position. At this point I did not know if it would be possible to play the horn in this way but I felt encouraged by the fact that bassoonists, cellists, bass players (to say nothing of pianists, or even organists) have successfully found ways of playing their instruments without having to lift them while doing so.

Developing the design:
The initial stages were spent in discovering that it would not do simply to rest the horn’s bell on my leg and then raise the instrument to the correct height by means of a block of some sort under my left heel. I believe the reason this does not work is because the raising of the leg in this way pulls the hamstrings muscles (those along the back of the thigh), which in turn pull forwards on the lower part of the pelvis tipping it back and inevitably (in my case) leading to the lower back collapsing outward, or slumping (a fundamental crime for anyone involved with Alexander Technique).

To get around this problem I experimented with various ways of supporting the edge of the bell not directly on my leg but above it on a height-adjustable support. The first thing I remember using was a thick book – which was fine, up to a point, but there was a tendency for it to fall off my leg, noisily, so it was a risky thing in concerts.

brilliant dad
What I needed, I figured, was an extendable thingy attached securely to the bell. For help with this I turned to my Dad, a repairer of musical instruments by trade, and an inventive genius.

He made a very ingenious gadget for me which consisted of two shaped plates which clamped together on either side of the bell, locked firmly by wing nuts. Attached to these plates were two parallel rods, each curved to follow the shape of the bell, which were fixed to a bar shaped to be comfortable when pressing down on my leg with the full weight of the horn. The whole assembly could be quickly unclamped and packed away so I could still get my horn into its case.

The Pipstick in useThe Pipstick in use

After perhaps six years of life with this strange looking thing clamped to my bell I felt it was time for a rethink. In use there had always been a tendency for the horn to tip towards the left because its foot was directly under the edge of the bell rather than being directly under its centre of gravity. I had to continuously resist this leftward tipping with an equal and opposite twist of my back, which began to irritate me after a while as it was a constant reminder of a flaw in the design.

Eventually, I hit upon the idea of fixing a support to the centre of the horn, rather than to the edge of the bell. Again, it was my Dad who actually built the thing and it turned out to be a significant improvement on the bell-attached version. Now, the horn is perfectly balanced over its supporting telescopic leg and, naturally, there is no longer a pull to the left to resist. In fact it is now so well balanced in the playing position that I can usually take both hands away from the instrument without it falling over.

The main advantage is in making the horn a far less tiring instrument to play. The back muscles, instead of being set in a constant immobile tension, are left with only the upper body and head to support. The arms have only to balance and steady the instrument rather than carry its full weight.

It came as a surprise to me to discover that the main disincentive to extended periods of practice had been tiredness in my back and shoulders. With the PipStick fitted I found myself doing more practise and also getting far more out of the time I spent because I didn’t have to keep putting the horn down to relieve any aches and pains. I believe this fact alone made my practise somewhere in the region of 20% more time-efficient than it was before (or, to put it another way, it has enabled me to do 30 minutes practice in only 25 minutes – which may not sound like much time saved but it certainly adds up over the years). Of course, simply saving time is not the most important advantage. The real benefit is that with the horn effortlessly floating in the playing position and no compulsion to put it down for short periods my embouchure naturally became both stronger and more efficient without me specifically having worked on that aspect.

If required I can play all day long without tiring. The PipStick is very good for my back – and much cheaper than an osteopath or chiropractor.

beforeafter

Two highly embarrassing photos from 1983

I have got to the point now where I am so accustomed to using the PipStick, and so comfortable with it that I would not ever want to play without it.

Playing in a standing position is now something I find rather hard work and I try to avoid it if I can. I suppose I could design and have built an extended version of the PipStick – one which reaches right down to the ground. It could even have a tripod base like a music stand so it could be freestanding….

Well, in fact I did try it – look at the photos – but I think I lost my nerve. I certainly lost that haircut.

I have had hundreds of enquiries from horn players worldwide wanting to know where they can get a PipStick. Until recently I have not been able recommend a maker but now, as of July 2000, I’m very pleased to say that Gale Lawson has agreed to make them. His work is excellent.

Contact me by¬†email if you are interested in trying or purchasing a PipStick. Current cost (including a setting up session with me) is somewhere in the region of £300.

The PipstickThe Pipstick

This is a very nice stick. Made by Gale Lawson for Tom Allard (playing in the photo). It renders Tom’s extremely heavy Alexander horn completely weightless.

As you can see it is a very strong construction – and it needs to be. It is not a good idea to fix a stick directly to any part of the tubing (as other stick makers do). The stick must be a strong and rigid construction in which you can have complete confidence. It should feel part of your instrument.

Please email me if you want to know more

5 Responses

  1. Pingback: Why you should try a Clebsch Strap!

  2. Pingback: Horn-Related Inventions | James Boldin's Horn World Blog

  3. Nicky

    Dear Pip,

    This looks really interesting. I love the 1980s photo. I am not sure a stick would work for me as I do the pivot thing, but I was wondering what you thought of a neck strap, like saxophonists have? I have a lot of pain in my neck and shoulders after I play for a long time.

    Kind regards
    Nicky

    Feb 28, 2014 at 8:54 am

    • Hi Nicky,
      Yes, you are right – the pivot thing is impossible if you use the PipStick. I used to pivot – though only slightly – and I soon stopped when I started using the PipStick. All the pivoting you need can be done at the lip, though, without the need to move the head in relation to the leadpipe.
      A neck strap won’t work as the anchor point would be in front of you, not below, as is the case with the alto sax.
      Yes, I think shoulder and neck pain is something a lot of horn players have. If you hold a static weight – even if it’s just your arms with no instrument – for long enough it will hurt.
      The PipStick solves this completely for me. I can play all day without shoulder or neck pain.

      Feb 28, 2014 at 10:15 am

  4. Susan Huhta

    I am interested in possibly buying a PIPSTICK to help support my french horn. Where do I go to purchase one?

    There is a similar product The Hornstick, but the company went out of buainess

    May 23, 2014 at 6:18 pm

Leave a Reply

Your email address will not be published. Required fields are marked *